Beneficiation Studies on High Ash Indian Coking Coal Using Heavy Medium Cyclone Test Rig
Keywords:
No Keywords.Abstract
Heavy medium coal processing technology has been widely used in coal preparation industries in the world since it is the most accurate and efficient coal preparation process to obtain clean coal with a highest possible yield. Separation of coal and impurities using this technology is based on density differences. Tests were carried out on a 100mm dia heavy medium cyclone test rig treating coal in the size range -6 + 0.5mm. A total of twenty seven experiments were carried out by varying the parameters like vortex finder diameter, spigot diameter and inlet feed pressure for each cyclone dia. The results indicate that for 100mm dia H. M. cyclone it is possible to achieve about 24% clean coal at an ash content of 17.3% from feed ash of 35% at a feed pressure of 0.35 kg/cm2, vortex diameter of 42.5mm and spigot diameter of 28mm.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Geological Survey of India (GSI) Report, Government of India. Inventory of Indian Coal Resources, 2014.
Sen, K., Chaudhuri, S. G. and Narasimhan, K. S.: “Nature of Low Volatile Coals of Jharia and Their Preparation Aspect International Conference on Energy,” Asia Energy Vision-2020, New Delhi, 15-18 November, (19913), pp. 137-74.
Sen, K. et al (2002): “Multi product beneficiation of inferior coals to user specific products,” XIV International Coal Preparation Congress, 2002, pp. 21-28.
Gouri Charan, T. et al (2009): “Washability and Pilot Plant Studies to Generate Bulk Cleans at Desired Qualities from Low Volatile Coking Coal of Jharia Coalfields, BCCL, CIL India,” International Seminar on Coking Coals and Coke Making: Challenges and Opportunities, 2009, pp 219-229.
Davis, J. J. (1994): Cleaning Coarse and Small Coal - Dense Medium Processes, in Advanced Coal Preparation Monograph Series Part VIII, Vol. 3, Australian Coal Preparation Society, Dangar, NSW, 1994.
Whitmore, R. L. (1958): “Coal Preparation: The Separation Efficiency of Dense Medium Vessels,” Journal of the Institute Fuel, Vol. 31, pp. 422-428 (1958).
Deurbrouck, A. W. and Hudy, J. (1972): “Performance Characteristics of Coal Washing Equipment-Dense-Medium Cyclones,” RI 7673, U.S. Bureau Of Mines (1972).