Selective Drop Breakage Studies : A Precursor for Dry Deshaling of Indian Non-Coking Coals
Keywords:
No Keywords.Abstract
The coal seams in India are mostly inter-banded, containing stone and hard shales, since such bands cannot be separated during the mining operations; these are mixed with the coal, thereby increasing the ash per cent of the run-of-mine (ROM) coal. In majority of the coalfields, it was found that the nature/character of the coal and stone is such that the stone is harder than the coal. Hence, it may be possible to remove the hard stone by incorporating a rotary breaker at the pithead or coal handling plant. However, before installing a rotary breaker, it is very much essential to understand the breakage characteristics of the coal and stone.
The present investigation includes selective drop breakage tests of coals and stones from variable heights. The differential breakage patterns of this material have been quantified in terms of Selective Crushing Index and its dependence on number of drops and heights. Attempts have been made to find a breakage constant with the assumption of drop breakage as a first-order process dominated by volume breakage. Results of the selective drop breakage tests on coal and stone from non-coking coalfields showed that there is a good potential of installing a rotary breaker at the pithead.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Sardana, A. K. (2002): “Techno-Economic Viability of Coal Washing of Power grade coal for India,” International Conference & Business Meet on ‘Fossil Fuel Power Generation,’ 21-23. New Delhi.
Geological Survey of India (GSI) Report (2010): “Government of India. Inventory of Indian Coal Resources.”
Sen, Kalyan, Das, N. S., Biswas, S., Mitra, S. K., Seth, A., Gnana Bharathi, D., Chaudhuri, S. G., Kumar, Anjani and Bhattacharya, M. M. (1999): “Basic Study initiated on improvement on coal quality: Beneficiation for cleaner use of non-coking coal,” International Symposium on Clean Coal Initiatives (CMRI), New Delhi, 22-24.
Biswas, S., Gouri Charan, T., Chattopadhyay, U. S. and Sen, K. (1995): “Selective Breakage of Non-coking Coals and Associated Stones – A Case Study.” Fuel Sci. Technol., 14 (3 & 4), pp. 95-100.
Esterle, J. S., Kojovicm, T., O'Brien, G. and Scott, A. C. (1996): “Coal Breakage Nodelling: A tool for managing fines generation.” Proceedings of the Mining Technology Conference, Fremantle WA, pp. 211-228.
Grouhel, P. H. J. (1988): “Single particle breakage of coal and application to modelling the Bradford breaker.” M.Tech thesis, JKMRC, University of Queensland, Brisbane, Australia.
Teo, C. S., Waters, A. G. and Nicol, S. K. (1990): “Quantification of the breakage of lump materials during handling operations,” International Journal of Mineral Processing, 30 pp. 159-184.
Sahoo, R. and Roach, D. (2005): “Quantification of the lump coal breakage during handling operation at the Gladstone port,” Chemical Engineering and Processing, 44, pp 797-804.