Influence of Welding Parameters on Weld Timings, Temperature Variation and Mechanical Strength of Friction Stir Welded AA6061 and AA6082 Alloy

Jump To References Section

Authors

  • Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumakuru - 572103, Karnataka ,IN
  • Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumakuru - 572103, Karnataka ,IN

DOI:

https://doi.org/10.18311/jmmf/2024/44426

Keywords:

AA6061, AA6082, Dissimilar Tool, Fracture Analysis, Friction Stir Welding, Temperature Variation, Weld Timings

Abstract

Friction stir welding is a type of welding that creates friction using a stirring tool while the work-pieces are held together in the welding joint configuration. Friction stir welding is a solid-state welding process. It is one of the efficient ways of joining technology of materials. The friction forces at a microscopic level to change the inner structure of metal properties and it is done by using the kinetic energy of friction in welding methods. This work is majorly carried out to optimize the process parameters like tool rotational speed, Feed, ultimate tensile strength of friction stir welded joint on AA6061 and AA6082 alloy. Welding speed and temperature variation in the workpiece during the welding is recorded for different trials. Failure analysis was carried out for different fractured surfaces by using Scanning Electron Microscope (SEM) revels ductile fracture due to micro void coalescence. The maximum ultimate tensile strength was at a speed of 900 rpm, feed 31.5 mm/min indicates high joint efficiency. Welding speed is more at the feed 90mm/min. Maximum rise in the temperature is at speed 2000 rpm and feed 90 mm/min.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2024-07-22

How to Cite

Prashantha, S., & Omkaresh, B. R. (2024). Influence of Welding Parameters on Weld Timings, Temperature Variation and Mechanical Strength of Friction Stir Welded AA6061 and AA6082 Alloy. Journal of Mines, Metals and Fuels, 72(4), 347–355. https://doi.org/10.18311/jmmf/2024/44426

Issue

Section

Articles
Received 2024-06-11
Accepted 2024-06-21
Published 2024-07-22

 

References

Chadha U, Selvaraj SK, Gunreddy N, Sanjay Babu S, Mishra S, Padala D, et al. A survey of machine learning in friction stir welding, including unresolved issues and future research directions. Mater Des Process Commun. 2022; (1): 2568347. https://doi.org/10.1155/2022/2568347 DOI: https://doi.org/10.1155/2022/2568347

Sankar BR, Umamaheswarrao PJMTP. Modelling and optimisation of friction stir welding on AA6061 Alloy. Materials Today: Proceedings. 2017; 4(8):7448-56. https://doi.org/10.1016/j.matpr.2017.07.076 DOI: https://doi.org/10.1016/j.matpr.2017.07.076

Mohan DG, Wu C. A review on friction stir welding of steels. Chin J Mech Eng. 2021; 34(1):137. https://doi.org/10.1186/s10033-021-00655-3 DOI: https://doi.org/10.1186/s10033-021-00655-3

Skillingberg M, Green JJLMA-C. Aluminum applications in the rail industry. Aluminum. 2007; 65(5):8.

Tavassolimanesh A, Nia A. A new approach for manufacturing copper-clad aluminum bimetallic tubes by Friction Stir Welding (FSW). J Manuf Process. 2017; 30:374-84. https://doi.org/10.1016/j.jmapro.2017.10.010 DOI: https://doi.org/10.1016/j.jmapro.2017.10.010

Wahid MA, Siddiquee AN, Khan ZAJMS, Technology O. Aluminum alloys in marine construction: characteristics, application, and problems from a fabrication viewpoint. Marine Systems and Ocean Technology. 2020; 15(1):70-80. https://doi.org/10.1007/s40868-019-00069-w DOI: https://doi.org/10.1007/s40868-019-00069-w

Liu J, Kulak M. A new paradigm in the design of aluminum alloys for aerospace applications. Materials Science Forum, Trans Tech Publ. 2000; 331-7. https://doi.org/10.4028/www.scientific.net/MSF. DOI: https://doi.org/10.4028/www.scientific.net/MSF.331-337.127

Boitsov A, Kuritsyn D, Siluyanova M, Kuritsyna VJRER. Friction stir welding in the aerospace industry. Russ Eng Res. 2018; 38:1029-33. https://doi.org/10.3103/S1068798X18120043 DOI: https://doi.org/10.3103/S1068798X18120043

Pabandi HK, Jashnani HR, Paidar MJ. Effect of precipitation hardening heat treatment on mechanical and microstructure features of dissimilar friction stir welded AA2024-T6 and AA6061-T6 alloys. J Manuf Process. 2018; 31:214-20. https://doi.org/10.1016/j.jmapro.2017.11.019 DOI: https://doi.org/10.1016/j.jmapro.2017.11.019

Prasad SR, Kumar A, Reddy CS, Raju LSJMTP. Influence of tool shoulder geometry on microstructure and mechanical properties of friction stir welded 2014-T6 Aluminium Alloy. Materials Today: Proceedings. 2017; 4(9):10207-11. https://doi.org/10.1016/j.matpr.2017.06.349 DOI: https://doi.org/10.1016/j.matpr.2017.06.349

Mao Y, Ke L, Chen Y, Liu F, Xing LJ. Technology Inhomogeneity of microstructure and mechanical properties in the nugget of friction stir welded thick 7075 aluminum alloy joints. J Mater Sci Technol. 2018; 34(1):228-36. https://doi.org/10.1016/j.jmst.2017.11.039 DOI: https://doi.org/10.1016/j.jmst.2017.11.039

Singh G, Kang AS, Singh K, Singh JJ. Experimental comparison of friction stir welding process and TIG welding process for 6082-T6 Aluminium alloy. Materials Today: Proceedings. 2017; 4(2):3590-600. https://doi.org/10.1016/j.matpr.2017.02.251 DOI: https://doi.org/10.1016/j.matpr.2017.02.251

Abolusoro OP, Akinlabi ET, Kailas SVJ. Engineering. Tool rotational speed impact on temperature variations, mechanical properties and microstructure of friction stir welding of dissimilar high-strength aluminium alloys. 2020; 42:1-12. https://doi.org/10.1007/s40430-020-2259-9 DOI: https://doi.org/10.1007/s40430-020-2259-9

El-Moayed MH, Shash AY, Rabou MA, El-Sherbiny MGJER. A detailed process design for conventional friction stir welding of aluminum alloys and an overview of related knowledge. Engineering Reports. 2021; 3(2):e12270. https://doi.org/10.15628/rbept.2021.12270 DOI: https://doi.org/10.1002/eng2.12270

Zhai M, Wu C, Su HJ. Influence of tool tilt angle on heat transfer and material flow in friction stir welding. J Manuf Process 2020; 59:98-112. https://doi.org/10.1016/j.jmapro.2020.09.038 DOI: https://doi.org/10.1016/j.jmapro.2020.09.038

Kumar PS, Shastry CS, Devaraju AJMTP. Influence of tool revolving on mechanical properties of friction stir welded 5083aluminum alloy. Mater Today Proc. 2017; 4(2):330-5. https://doi.org/10.1016/j.matpr.2017.01.029 DOI: https://doi.org/10.1016/j.matpr.2017.01.029

Guo N, Fu Y, Wang Y, Meng Q, Zhu YJM. Microstructure and mechanical properties in friction stir welded 5A06 aluminum alloy thick plate. Mater Des. 2017; 113:273-83. https://doi.org/10.1016/j.matdes.2016.10.030 DOI: https://doi.org/10.1016/j.matdes.2016.10.030

Liu H, Fujii HJMS, A E. Microstructural and mechanical properties of a beta-type titanium alloy joint fabricated by friction stir welding. Mater Sci Eng. 2018; 711:140-8. https://doi.org/10.1016/j.msea.2017.11.006 DOI: https://doi.org/10.1016/j.msea.2017.11.006

Fathi J, Ebrahimzadeh P, Farasati R, Teimouri RJ. Friction stir welding of aluminum 6061-T6 in presence of watercooling: Analyzing mechanical properties and residual stress distribution. Int J Lightweight Mater Manuf. 2019; 2(2):107-15. https://doi.org/10.1016/j.ijlmm.2019.04.007 DOI: https://doi.org/10.1016/j.ijlmm.2019.04.007

Xu W, Liu J, Chen D, Luan G, Yao JJMS, A E. Improvements of strength and ductility in aluminum alloy joints via rapid cooling during friction stir welding. Mater Sci Eng. 2012; 548:89-98. https://doi.org/10.1016/j.msea.2012.03.094 DOI: https://doi.org/10.1016/j.msea.2012.03.094

Liu H-J, Zhang H-j, Huang Y-x, Lei YJToNMSoC. Mechanical properties of underwater friction stir welded 2219 aluminum alloy. Trans Nonferrous Met Soc China. 2010; 20(8):1387-91. https://doi.org/10.1016/S1003-6326(09)60309-5 DOI: https://doi.org/10.1016/S1003-6326(09)60309-5

Zhang H, Liu HJM. Mathematical model and optimization for underwater friction stir welding of a heat-treatable aluminum alloy. Mater Des. 2013; 45:206-11. https://doi.org/10.1016/j.matdes.2012.09.022 DOI: https://doi.org/10.1016/j.matdes.2012.09.022

Pourali M, Abdollah-Zadeh A, Saeid T, Kargar F. Influence of welding parameters on intermetallic compounds formation in dissimilar steel/aluminum friction stir welds. J Alloys Compd. 2017; 715:1-8. https://doi.org/10.1016/j.jallcom.2017.04.272 DOI: https://doi.org/10.1016/j.jallcom.2017.04.272