Multi-Objective Optimization of Plate-Fin Heat Exchanger Using Taguchi-based Grey Relational Analysis
DOI:
https://doi.org/10.18311/jmmf/2022/31984Keywords:
Design constraints, Reynolds’s no, Nusselt no, core area, core length, fin height, friction factor, taguchi, Response surface methodologyAbstract
This work involves the investigation of values of design constraints which are optimum and which can be used or helpful in design optimization of Plate-Fin Heat Exchanger (PFHE). Core Area, Core Length Reynolds’s Number and Fin Height. Pressure drop (Minimum–Friction factor) and heat transfer (maximum–Nusselt number) are fixed as the responses. The Taguchi method for Design of Experiments (DOE) has been used to frame the number of experiments for the taken values of the factors and Response surface methodology (RSM) has been used as the optimization tool from MINITAB. At the end optimization curves are obtained to find the optimal values of the factors resulting in the desired values of responses MINITAB. A conclusion is made to find out the best statistical model for optimization of performance parameters in a PFHE. For the purpose, Plate fin heat exchanger is considered.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
R.K. Shah and Dušan P. Sekulic, Fundamentals of Heat Exchangers, John Wiley and Sons.
Taborek, J., Hewitt, G.F. and Afgan, N. (1983). Heat Exchangers: Theory and Practice. Hemisphere Publishing Corporation. ISBN 0-07- 062806-8.
”The Standards of the Brazed Aluminium Plate- Fin Heat Exchanger Manufacturers’ Association” (PDF). Archived from the original (PDF) on 2008- 09-08. Retrieved 2008-03-19.
M. I. N. Ma’arofet al, Influence of fins designs, geometries and conditions on the performance of a plate-fin heat exchanger-experimental perspective, Journal of Mechanical Engineering and Sciences ISSN (Print): 2289-4659; e-ISSN: 2231- 8380 Volume 13, Issue 1, pp. 4368-4379, March 2019 DOI: https://doi.org/10.15282/jmes.13.1.2019.02.0372
Shah RK, Sekulic DP. Fundamentals of heat exchanger design. John Wiley & Sons, Inc; 2003. DOI: https://doi.org/10.1002/9780470172605
Thompson D. Cool system, hot results. Wind systems magazine; February 2010. p. 40e3.
Webb RL, Kim NH. Principles of enhanced heat transfer. Taylor & Francis Group; 2005. DOI: https://doi.org/10.1201/b12413
Guo, K., Zhang, N., Smith, R., Optimisation of fin selection and thermal design of countercurrent plate-fin heat exchangers. Applied Thermal Engineering, 78 (2015): 491-499. DOI: https://doi.org/10.1016/j.applthermaleng.2014.11.071
Karmoker, J.R.; Hasan, I.; Ahmed, N.; Saifuddin, M.; Reza, M.S. (2019). ”Development and Optimization of Acyclovir Loaded Mucoadhesive Microspheres by Box -Behnken Design”. Dhaka University Journal of Pharmaceutical Sciences. 18 (1): 1– 12. doi:10.3329/dujps.v18i1.41421. DOI: https://doi.org/10.3329/dujps.v18i1.41421
Asadi, Nooshin; Zilouei, Hamid (March 2017). ”Optimization of organosolvpretreatment of rice straw for enhanced biohydrogen production using Enterobacteraerogenes”. Bioresource Technology. 227: 335–344. doi:10.1016/ j.biortech.2016.12.073. PMID 28042989 DOI: https://doi.org/10.1016/j.biortech.2016.12.073
S. Gopalakannan, T. Senthilvealn, Application of response surface method on machining of Al- SiCnano-composites, Measurement, Vol. 46, 2013, pp.2705-2715. DOI: https://doi.org/10.1016/j.measurement.2013.04.036
I. Kocioglu, A. Cansiz, M.N. Khalaji, Experimental investigation for optimization of design parameters in a rectangular duct with plate-fin heat exchanger by Taguchi method, Applied Thermal Engineering, Vol.50, 2013, pp.604-613. DOI: https://doi.org/10.1016/j.applthermaleng.2012.05.036
R. Pachaiyappan et al., Analysis and Optimization of Plate-Fin Heat Exchanger using Computational Fluid Dynamics And Response Surface Methodology, International Journal of Advanced Engineering Technology E-ISSN 0976-3945 Int J AdvEngg Tech/Vol. VII/Issue I/Jan.-March, 2016/880-886.
JainenderDewatwal Design of compact plate-fin heat exchanger, Thesis submitted to NIT Rourrkela, 2009.