Influence of Heat Treatment on the Exit Burr Height in Drilling of Al Alloy 7075 – A Statistical Analysis
Jump To References Section
DOI:
https://doi.org/10.18311/jmmf/2020/26902Keywords:
Drilling, Burr Height, Al Alloy 7075, As-cast Condition, Heat Treatment, Taguchi, ANOVA.Abstract
In this work, the effect of heat treatment on the burr height is investigated with three different cutting speeds and feeds in drilling of Al alloy 7075. Al alloy was chosen in three different conditions such as As-cast condition, annealed condition and hardened condition. Three different feeds such as 30 m/min, 60 m/min, 90 m/min and three different cutting speeds such as 12.56 m/min, 37.68 m/min, 62.8 m/ min are chosen. Drilling tests are conducted as per the Taguchi's L9 orthogonal array. The experimental results are analyzed using Analysis of Variance (ANOVA) to study the influence of the factors on burr height.Downloads
Download data is not yet available.
Metrics
Metrics Loading ...
Downloads
Published
2020-06-01
How to Cite
Ashok, N., Demeke, N. T., & Shanmughasundaram, P. (2020). Influence of Heat Treatment on the Exit Burr Height in Drilling of Al Alloy 7075 – A Statistical Analysis. Journal of Mines, Metals and Fuels, 68(6), 214–218. https://doi.org/10.18311/jmmf/2020/26902
Issue
Section
Articles